AH-HI/C LED High-intensity Type B Aviation Obstruction Light
High-intensity Aviation Obstruction Light used in Tower Crane, Wind
Turbine, High Mast, Metallurgies, Towers(Telecom, GSM, Electric),
Smokestacks, Large Bridge, High-rise Buildings and any other
potentially hazardous obstructions over 150meter to air traffic
with a flashing white safety light.
1.Use the optical design of parabolic reflector, the visual range
further and angle more accurate.
2. Light source adopts high quality xenon tubes which are high
brightness with light efficiency 100LM/W, low power consumption,
long lifespan up to flash 100,000,000 times.
3.Based on the single chip computer control, automatic
identification sync signal, do not distinguish the main light and
auxiliary light, and also could be controlled by controller.
4.Same power supply voltage with synchronous signal, integrate in
power supply cable, emliminate the damage by error installation
5.Used the photosensitive probe fit for the natural light spectrum
curve, automatic control light intensity level. day/twilight/night
6.The house of the light adopts SUS304 stainless steel, Lens of
Tempered glass; the structure is high strength, resistance to
7.More than 91% utilizing rate of illuminating efficiency.
8.Perfect protection function in control circuit.Light will stop
working automatically under condition of light short circuit,over
temperature and working exceptional.After fault is solved,control
circuit will automatically resume to work normally.
9.The circuit of the light has surge protection whose lightning
proof ability is In 7.5KA/5 times, Imax 15KA so that the light is
suitable to harsh environment.
10.Integral structure, protection lever of IP65.
11. Ignitability rate UL-94V0, fit for all kinds of industrial
12.GPS synchronizing function is available.
2.Standard: ICAO (Aerodromes Annex 14) High-intensity Type A ,FAA
4.Flash rate:40 to 60times/minute
5.Light source: Xenon tube
6.Service life of LED:≥100,000hours
7.Operating voltage:AC220V (option voltage,eg.AC120V,AC110V,DC48V)
9.Overall Size(mm):486 × 400 × 320
10.Installation Size:447 × 340 × M10
11. Vertical degree: 120°
12. Horizontal degree: 360°
-Housing: Lens of Tempered glass
-Base: die casting aluminum
15.Emitting Color: White
17.Wind load: 80m/s
18. Protection Standard: IP65
2.Applications: Applied to High-rise Building, High Chimney,
marking towers (Telecom, GSM, Microwave & TV),High Pole,Tower
Crane, Wind Tubinebridge.large-scale port machinery,large engineer
machinery and wind turbines.
3.Standard: ICAO Type B High intensity and FAA L-856
4.Certificate: CAAC Certificate(ICAO Certificate) and FAA
6.Fault Records: None
7.Quantity/Delivery Day: 100 pcs / 20 Days